DIY directional lighting EASY AND CHEAP!

These little magic pieces cost no more then 99 cents. It has three LED's RED BLUE AND GREEN and has three settings on a push button switch.

Remove lighting from foam housing... should be glued at two points ( just unpeel )

Once removed you can see there is a thin wire. When bending wire watch that it doesn't make contact with each other because the lights will dim.

Tape paint or cover so pvc doesn't glow through.

Glue or tape at the end. It would work better with electricle tape.

Can be seen in full light as well

Spooky effect in the dark

Without lighting

With the three colored LED's AND three different settings, you will get a great effect.